# 12.5 Address List

**Introduction**

\[Address list] could display all addresses which are used in project, this section will introduce this tool in detailed.

**Description**

**Connection:** Select HMI connection, such as COM2 Modbus RTU;

**Address mode:** Select word address or bit address;

**Address type:** Select register, or function code, such as 4;

**Station:** Select connected device station;

**Start address:** Set start address in window;

**Window:** Display all addresses start from \[Start address], red means occupied, green means unoccupied, as below figure shows;

![](https://2132722362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2Fhmieditorp-manual%2F-M4Sk_6Z3j8OWNTNVbbA%2F-M4SkdbdqXTBYSNO9lZd%2F0.png?generation=1586415967029177\&alt=media)

**Information:** It is display the selected address information in project, as below figure shows;

![](https://2132722362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2Fhmieditorp-manual%2F-M4Sk_6Z3j8OWNTNVbbA%2F-M4SkdbeQ82I2O5CnoNY%2F1.png?generation=1586415967056760\&alt=media)

**Replace:** Enter new address to replace the selected address in project;

![](https://2132722362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2Fhmieditorp-manual%2F-M4Sk_6Z3j8OWNTNVbbA%2F-M4Skdbfrm_fj1Tjserz%2F2.png?generation=1586415967029742\&alt=media)
