# 12.6 Decompiled

**Introduction**

When uploading a project from the HMI to the PC, the \*\*.wmt file is obtained, which needs to be decompiled before it could be opened with the HMIEditorP software.

This section introduces this tool in detailed.

![](https://2132722362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2Fhmieditorp-manual%2F-M4SkMkzWIzsDTG7UOE4%2F-M4SkPxRHs15vOZqA9RF%2F0.png?generation=1586415907014296\&alt=media)

**Operating procedure**

1. Open \[Decompiled] tool;
2. Select WMT file by clicking \[Browse] in \[WMT location];
3. Set save path in \[Location];
4. Enter password in \[Project Password] (Enter as needed);
5. Click \[OK] to perform the operation;

**Result**

A project folder is created.
