# 5.4 Extend

## Into setup

**Introduction**

\[Into setup] provides entering ways of the HMI setup interface and encrypting the setup screen;

**Operating procedure of setting into setup way**

1. Open \[Project setting] windows;
2. Open \[extend] sub-windows;
3. Select \[Startup] or \[Running];
4. Set \[Time];

![](https://2132722362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2Fhmieditorp-manual%2F-M149hdTVlkzO61nvHRB%2F-M149oACqgq2cP_L_sRj%2F0.png?generation=1582782170692198\&alt=media)

{% hint style="success" %}
**Result**

1. If select \[Startup] mode, and the \[Time] is 5 seconds
2. When HMI is starting, holding press the top right corner of screen;
3. Keep press 5 seconds;
4. HMI will display setup screen;

2\. If select \[Running] mode, and the \[Time] is 5 seconds

* When HMI is running, holding press the top right corner of screen;
* Keep press 5 seconds;
* HMI will display setup screen;
{% endhint %}

**Operating procedure of encrypting the setup**

1. Open \[Project setting] windows;
2. Open \[extend] sub-windows;
3. Set password

{% hint style="success" %}
**Result**

Password is required during entering the setup screen;
{% endhint %}

## Special expansion

**Introduction**

\[Special expansion] is for extending audio play and camera input functions for special HMI models;

![](https://2132722362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2Fhmieditorp-manual%2F-M149hdTVlkzO61nvHRB%2F-M149oADzc5X9GkuMOEN%2F1.png?generation=1582782170696836\&alt=media)

**Operating procedure**

1. Open \[Project setting] windows;
2. Open \[extend] sub-windows;
3. Check function;
4. Click \[Set] button to open setting screen;
5. Do configuration for function;
6. Click \[OK] to save and exist;

{% hint style="success" %}
**Result**

Enbale audio play function and camera function in HMI project
{% endhint %}

{% hint style="info" %}
**Note:**

Those two functions are not available for all HMIs, only special HMI models could support them;

The details of function settings please refer to [Advanced function](broken-reference);
{% endhint %}

## Input device

**Introduction**

\[Input device] is used for enable input devices, like keyboard and mouse.

![](https://2132722362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2Fhmieditorp-manual%2F-M149hdTVlkzO61nvHRB%2F-M149oAEWw6-CLZFValA%2F2.png?generation=1582782170687398\&alt=media)

**Operating procedure**

1. Open \[Project setting] windows;
2. Open \[extend] sub-windows;
3. Check \[Enable keyboard] and \[Display cursor]
4. Click \[OK] to save and exist;

{% hint style="success" %}
**Result**

The arrow will be display in screen when HMI is running, and keyboard could be used for entering code and control cursor.
{% endhint %}
