5.2 HMI IP

IP settings

Introduction

This is for setting HMI IP. When enable DHCP mode, the setting is invalid.

There are system-special addresses for them, the detailed information of addresses, please refer to the help document.

Operating procedure

1. Open [Project setting] windows;

2. Open [HMI IP] sub-windows;

3. Check [HMI IP];

4. Enter parameters;

5. Click [OK] button to save setting and exit windows;

Remote access password

Introduction

[Remote access password] is for 8000 & 9000 series HMI, the password is for remote function, when users use Smart APP on mobile or Cloud website on PC, which could access HMI screen remotely, the APP or website will require this password.

Operating procedure

1. Open [Project setting] windows;

2. Open [HMI IP] sub-windows;

3. Enter password;

4. Click [OK] button to save setting and exit windows;