Siemens S7-XXX Ethernet

Supported Series: Siemens S7-1200 and S7-1500

HMI Setting

Items	Settings	Note
Protocol	Simens S7-XXX
Connection	Ethernet
Port No.	102
PLC station No.	1 (for S7-1500)/ 2 (for S7-1200)

Address list

Type	Device register	HMI register	Format	Range	Note
Bit	I	I	M d.o	d:0--9999 o:0-7
	Q	Q	Q d.o	d:0--9999 o:0-7
	M	M	M d.o	d:0--9999 o:0-7
	DB0.DB-DB99.DB	DBxDB	DBxDB nndddd.o	nn:0-9999, dddd:0-9999, o:0-7	nn: DB No. dddd: address value o: digit address
Word	M	MB	MB d	d:0-99999
	M	MW	MW d	d:0-99999	MW0=MB(0~1) MW2=MB(2~3) Address value is a multiple of 2
	M	MD	MD d	d:0-99999	MD0=MB(0~3) MD4=MB(4~7) Address value is a multiple of 4
	I	IW	IW d	d:0-99999
	Q	QW	QW d	d:0-99999
	DB0.DB-DB99.DB	DBxDBB	DBxDBB nndddd	nn: 0-9999 dddd:0-9999	nn: DB No. dddd: address value
	DB0.DB-DB99.DB	DBxDBW	DBxDBW nndddd	nn:0-9999 dddd:0-9999	nn: DB No. dddd: address value Address value is a multiple of 2
	DB0.DB-DB99.DB	DBxDBD	DBxDBD nndddd	nn:0-9999 dddd:0-9999	nn: DB No. dddd: address value Address value is a multiple of 4

Communication settings

1) Enable HMI Ethernet in [Project Settings];

2) Set PLC IP in [Device IP] settings;

✎Note:

1. The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.

2. HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.

Communication cable