3.1 Creating Project
Last updated
Was this helpful?
Last updated
Was this helpful?
Introduction
The following steps will show how to start HMIEditorP and create a project.
Requirement
HMIEditorP programming software is installed.
Operating Procedure
Start HMIEditorP software by click icon, or from Start Menu;
Find [HMIEditorP] folder;
Click [HMIEditorP] icon to start software;
4. Click [New project];
5. Configure project name, project path;
6. Select HMI model and communication protocol;
7. Click [OK] to save setting;
Result
User could find a folder named HMIProject on the desktop.
In the folder user could find a file with a suffix named [.pi]. Double click the file to open the project.