3.6 Download

Introduction

This chapter provides information about the download project and a description of how to download project from PC to HMI device.

General procedure

Users could use [HMIEditorP] to execute download, also there is [Download.exe] for download. Users will need at least the following components to execute download.

• A .wmt file;

• HMI device;

• Programming cable or connect HMI to Local Area Network;

Operating procedure

1. Complete project programming and compile the project;

2. Connect HMI via USB programming cable;

3. Click the in toolbar;

4. Check the [PC Port] drop-list menu, if it shows [USB: Download], it means HMI is accessed by PC via USB download cable; (Check the [PC Port] drop-list menu, select [Ethernet], and enter IP of HMI in [IP] enter bar)

5. Click [PC to HMI] button to execute project download;

Result

1. Download project file successfully;

2. HMI restarts;

3. HMI loads project;